Dolphin Usb To Serial Driver Windows 7
Download >>>>> https://blltly.com/2tzc7V
How to Install Dolphin USB to Serial Driver on Windows 7
If you have a Dolphin USB to serial adapter and want to use it on your Windows 7 computer, you may need to install a driver first. A driver is a software that allows your computer to communicate with the hardware device. Without a driver, your computer may not recognize the adapter or work properly with it.
In this article, we will show you how to download and install the Dolphin USB to serial driver on Windows 7 in a few simple steps.
Step 1: Download the Driver
The first step is to download the driver from the official website of Dolphin Peripherals. You can find the driver for Windows 7 under the \"Downloads\" section of their website. Here is the direct link: https://www.dolphinperipherals.com/downloads/usb-to-serial-adapter/
Click on the \"Download\" button next to the driver for Windows 7 and save the file to your computer. The file name should be something like \"Dolphin_USB_to_Serial_Driver_Windows_7.zip\".
Step 2: Extract the Driver
The next step is to extract the driver from the zip file. You can use any software that can open zip files, such as WinZip, WinRAR, or 7-Zip. Right-click on the zip file and choose \"Extract All\" or a similar option. Choose a destination folder where you want to extract the driver files and click \"Extract\".
You should see a folder named \"Dolphin_USB_to_Serial_Driver_Windows_7\" with several files inside. These are the driver files that you need to install.
Step 3: Install the Driver
The final step is to install the driver on your computer. Before you do that, make sure you have plugged in your Dolphin USB to serial adapter to your computer's USB port. Then, follow these steps:
Go to the folder where you extracted the driver files and double-click on the file named \"Setup.exe\". This will launch the driver installation wizard.
Follow the instructions on the screen and click \"Next\" until you reach the end of the wizard. You may need to accept some terms and conditions or choose some options along the way.
When the installation is complete, click \"Finish\" and restart your computer if prompted.
Congratulations! You have successfully installed the Dolphin USB to serial driver on your Windows 7 computer. You can now use your Dolphin USB to serial adapter with any software that supports serial communication, such as HyperTerminal, PuTTY, or Arduino IDE.
If you encounter any problems with using your Dolphin USB to serial adapter on Windows 7, here are some tips that may help you:
Make sure you have installed the correct driver for your adapter and your operating system. You can check the model number of your adapter on the back of the device or on the packaging.
Make sure you have plugged in your adapter to a working USB port on your computer. You can try a different USB port if the first one does not work.
Make sure you have selected the correct COM port and baud rate for your adapter in the software that you are using. You can check the COM port number of your adapter in the Device Manager under \"Ports (COM & LPT)\". The default baud rate for most adapters is 9600.
If you still have problems, you can contact Dolphin Peripherals customer support for further assistance. You can find their contact information on their website: https://www.dolphinperipherals.com/contact-us/
In this article, we have shown you how to install the Dolphin USB to serial driver on Windows 7 in a few simple steps. We hope this guide was helpful and easy to follow. If you have any questions or feedback, please leave a comment below. Thank you for reading! 061ffe29dd